Why GA4 shows traffic as Unassigned and how to fix it

The Unassigned channel is GA4's way of saying that it knows the source and medium but cannot place them in any channel. The cause is almost always in how the links are tagged, and it is easy to fix.

Updated 27 October 2026 · 5 min read

On this page
  1. What Unassigned means
  2. How to find the cause
  3. The most common causes
  4. Fix the links
  5. A custom channel group for offline traffic
  6. Check before you publish

What Unassigned means

GA4 sorts every visit into a channel of the default channel group, such as Paid Social, Email or Referral. It goes through its rules in order and picks the first one that matches the visit's source and medium. If no rule matches, the visit lands in the Unassigned channel.

Unassigned is not the same as Direct. Direct means GA4 knows nothing about the source. Unassigned means the source and medium are known, but they are written in a way GA4's rules do not recognize.

How to find the cause

  1. In GA4, open Reports → Acquisition → Traffic acquisition (if your GA4 interface is in Finnish or another language, the names are translated).
  2. Change the table's primary dimension to Session source / medium.
  3. Add the filter Session default channel group is Unassigned.

Now you can see which source and medium combinations send traffic to Unassigned. Usually a few familiar values stand out, such as newsletter / newsletter or trade_fair / qr.

The most common causes

A medium GA4 does not know

GA4's rules know certain mediums, such as email, social, cpc, display and referral. Made-up values or Finnish words, such as newsletter, ad, uutiskirje or some, do not match. Newsletters are the most common example:

GA4 channel when the source is newsletter and the medium newsletter
Unassigned

None of the rules of GA4's default channel group match, so the traffic shows up in reports without a channel.

The fix is to change the medium to a value GA4 knows. For newsletters, that is email:

GA4 channel when the source is newsletter and the medium email
Email

The source or medium is email.

Social is trickier. If the source is facebook, the visit lands in Organic Social however the medium is spelled, because the source is known. With an unknown source, the same medium lands in Unassigned.

Print, QR codes and other offline traffic

GA4 has no default channel for print, posters or events. That is why QR code traffic always lands in Unassigned, even when the link is carefully tagged:

GA4 channel when the source is trade_fair_2026 and the medium qr
Unassigned

None of the rules of GA4's default channel group match, so the traffic shows up in reports without a channel.

This is not a mistake in the link. The fix is made in GA4 with a custom channel group, see below.

The medium is missing

If a link has utm_source but no utm_medium parameter, GA4 records the medium as (not set). The channel is then decided by the source alone, and an unknown source lands in Unassigned. Check hand-written links and shortened URLs in particular.

Technical causes

If both the source and the medium of the Unassigned rows are (not set), the cause is usually in the measurement setup, not in the links. For example, events may be sent from a server without session information, or an event is recorded before the session has started. You sort these out in the GA4 or tag manager settings.

Fix the links

Once you have found the wrong values, fix them in every link that is still being shared:

  • newsletter templates and your email service's automatic settings,
  • URL parameters in ads,
  • links in social profiles and email signatures.

The fix only applies to new visits. GA4 does not change data it has already collected, so old visits stay in Unassigned in the default channel group.

Agree on one list of allowed mediums with your team. Then no new Unassigned values appear when someone invents their own way to write “newsletter”.

A custom channel group for offline traffic

For QR codes and print, create a custom channel group in GA4. It is a copy of the default group with one channel added:

  1. Open Admin → Data display → Channel groups and select Create new channel group.
  2. Add a channel, for example named “Offline / QR”, with the condition Medium exactly matches qr.
  3. Save, and choose this channel group in your reports instead of the default group.

A custom channel group also works retroactively, so it sorts data you have already collected. In the same way, you can gather old wrong values, such as the medium newsletter, into the right channel.

Check before you publish

The easiest way to avoid Unassigned is to check the channel before the link is shared. The channel checker shows which channel your values land in and suggests a fix.

Try it yourself

Open the channel checker with this guide's example values.

Open the channel checker

Kanavoi is a Finnish UTM tool for teams. It keeps naming consistent and shows the GA4 channel before a link is shared.

The same naming for the whole team

In Kanavoi's team version, the agreed values are ready-made lists, and nobody can misspell a campaign. Join the waitlist and we'll let you know when accounts open.